looking for dripper

[flavourtank]

Ive been having a search and being new to making my own coils was wondering if people have had the following drippers or know of a good beginner level dripper(single coil).

www.cloud9vaping.co.uk/Micro-D

www.vapor-z.co.uk/collections/rebuildable-atomizers/products/smoktech-mini-uda-stainless-steel

Thanks

[chuck]

The Igo L is a cheap little dripper that's great value, well worth a look.

[Perpetua]

I always suggest IGO's . . . though I'm not up in the current crop of RDA's.

www.vapegear.co.uk/product/igol

www.fasttech.com/products/0/10005100/1400500-igo-l-rebuildable-stainless-steel-dripping

Super easy to re-coil and lots of space to work in. .


Crossed posts with chuck.

[ionian]

I've not tried either of those two, but for a single coil simple dripper you can't go wrong with the IGO-L.

www.fasttech.com/product/1400500-igo-l-rebuildable-stainless-steel-dripping
www.ivapour-elixir.co.uk/parts/rebuildable-atomisers/igo-l-atomizer.html

The only thing is no adjustable airflow, but it's as simple as it gets and easy to build.

edit -crossed posts above, but looks like we all agree!

[flavourtank]

Was very tempted by the one from vapour-z (free delivery) I get bored of wanting with fast tech tbh lol, I did read reviews bout the igo-l air flow issue and people drilled it out

[BrenD]

I was going to get an Igo-L until I watched PBusardo's review of it. Nothing put me off, but his mention of the Bulldog interested me. The screws look a lot easier to deal with, so I think I'll pull the trigger sooner rather than later.

www.vapourworld.co.uk/shop/article_100591/Bulldog-DD-Atomizer.html?sessid=1Vx7JuVSmDZeFSCiHJtiJZ0kqnRwzmlyMBIsHwLhL3LQGbt70RBZD7derwKCtdII&shop_param=cid%3D115%26aid%3D100591%26

Sent from my HTC One_M8 using proboards

[Perpetua]

Jul 17, 2014 21:18:12 GMT BrenD said:

I was going to get an Igo-L until I watched PBusardo's review of it. Nothing put me off, but his mention of the Bulldog interested me. The screws look a lot easier to deal with, so I think I'll pull the trigger sooner rather than later.

www.vapourworld.co.uk/shop/article_100591/Bulldog-DD-Atomizer.html?sessid=1Vx7JuVSmDZeFSCiHJtiJZ0kqnRwzmlyMBIsHwLhL3LQGbt70RBZD7derwKCtdII&shop_param=cid%3D115%26aid%3D100591%26

Sent from my HTC One_M8 using proboards

Honestly . . . I wouldn't Bren, it's not even SS. There are better out there, for the same if not less . . . .

[ruffdog]

Really don't like the look of this one bit, much nicer / better on vapeescape, myepack few to choose from myepack.co.uk/rba-rda.html?p=2

Vape Escape has a few and I actually really liking the smoktek caterpillar. Might get one next payday. www.vapeescape.co.uk/MODS--Advanced/Rebuildables/?wizid=tp1d9rn5rens9si20ot0t85ip0

Order tomorrow from either place with some kanthal and you'll be dripping Saturday!.

Ruffie.

[BrenD]

Jul 17, 2014 21:21:44 GMT Perpetua said:

Jul 17, 2014 21:18:12 GMT BrenD said:

I was going to get an Igo-L until I watched PBusardo's review of it. Nothing put me off, but his mention of the Bulldog interested me. The screws look a lot easier to deal with, so I think I'll pull the trigger sooner rather than later.

www.vapourworld.co.uk/shop/article_100591/Bulldog-DD-Atomizer.html?sessid=1Vx7JuVSmDZeFSCiHJtiJZ0kqnRwzmlyMBIsHwLhL3LQGbt70RBZD7derwKCtdII&shop_param=cid%3D115%26aid%3D100591%26

Sent from my HTC One_M8 using proboards

Honestly . . . I wouldn't Bren, it's not even SS. There are better out there, for the same if not less . . . .

That it isn't stainless is a little bit of an issue, but someone who'll have fiddled with a lot of RDAs saying it was the easiest to setup that he has come across certainly caught my attention. As did watching him struggle a little with the Igo.

My eyesight and coordination are terrible, wrapping some kanthal round a bit of wick or a drill bit shouldn't be too tricky, but I could be screwed after that. If slightly poorer build quality is the trade for something I'll be able to use without frustration, it might be one worth making.

Or maybe I should stop being a wuss and give the Igo a go... go?

Sent from my HTC One_M8 using proboards

[enjay]

BrenD for sheer awesomeness I'd say this one

www.kernowvapes.co.uk/APO_dripping_atomizer_clone/p2086842_12470154.aspx

It can do duals or single coil and is excellent to build on, loving mine.

[Perpetua]

Jul 17, 2014 22:27:36 GMT BrenD said:

Jul 17, 2014 21:21:44 GMT Perpetua said:

Honestly . . . I wouldn't Bren, it's not even SS. There are better out there, for the same if not less . . . .

That it isn't stainless is a little bit of an issue, but someone who'll have fiddled with a lot of RDAs saying it was the easiest to setup that he has come across certainly caught my attention. As did watching him struggle a little with the Igo.

My eyesight and coordination are terrible, wrapping some kanthal round a bit of wick or a drill bit shouldn't be too tricky, but I could be screwed after that. If slightly poorer build quality is the trade for something I'll be able to use without frustration, it might be one worth making.

Or maybe I should stop being a wuss and give the Igo a go... go?

It was ok, when it first came out Bren - also known as a Phoenix and other design names that I've forgotten.

But it's nothing special now, personally I think you could find a lot better for a tenner and it be in SS.

[BrenD]

The Igo-L, 19 drip tips and a bottle of juice for a tenner in the classies was too good a deal to pass on.

Looks like I won't be buying a bulldog after all!

Sent from my HTC One_M8 using proboards

[Perpetua]

Jul 19, 2014 0:28:39 GMT BrenD said:

The Igo-L, 19 drip tips and a bottle of juice for a tenner in the classies was too good a deal to pass on.

Looks like I won't be buying a bulldog after all!

I knew you could do better Bren, great haul there for £10.

[ruffdog]

Well done, let's see your first build PIC when you've done one.

Ruffie

[BrenD]

Jul 19, 2014 7:13:24 GMT ruffdog said:

Well done, let's see your first build PIC when you've done one.

Ruffie

I've already hijacked the thread enough, so why not embarrass myself with a pic of my first build?


 
Not easy to post a pic on my phone! Or to type below it. Looks like I'll have to post and edit.

It won't win any prizes in a beauty competition and I'll obviously tidy the wick up a bit, but my Vamo reckons it's a 2.3ohm coil. A passable first attempt. I can't be bothered to take it apart and remove a wrap, time to see how she vapes...

Edit: it works! The wicking isn't perfect, but I tried it with a liquid I was familiar with and it tasted better than it does in the Nautilus. I'll have to try again tomorrow