Recent Posts

Great thanks. So it's not the Tobeco clone and is the Rainbow Heaven one...

That's mighty tempting at the price..

A more recent study is very encouraging too:

publichealth.drexel.edu/SiteData/docs/ms08/f90349264250e603/ms08.pdf

First thing I would check is the center pin. Prise it out and if it falls out then the red wire from the circuit board to the center pin is disconnected. If the red wire is disconnected it may be possible to solder it back without having to take the thing apart provided you can retrieve the red wire through the small hole.

If the red wire is still attached you can push it back in with some tweezers or some such. Then use a solid clearo/carto like a EVOD and wiggle the connector from the tube. Go slow and don't wrench. It's all very delicate and putting the button back in takes some knack or you'll end up shearing off components from the circuit board. So go slow.

Thanks Summer. Glad you got it today.

I just close the juice control and remove the top nut and fill..




Edited to add: I am referring to the Ody to Kayfun upgrade kit and post was made in jest..

Make a carto cleaner by supergluing a carto condom with the bottom punched out, to a syringe..You can then use high pressure hot water to clean the gunk if needs must.

I have used it with very good success when I was using cartos.

Generally water vapour (steam) is safe to breathe in even direct from the tap. Water used in Sauna's are not marked as drinking water in many countries. Britain is one of the very few countries which supplies drinking water in all taps.

Deionised or distilled water is used to cut VG because it is non-conductive to prevent the atty shorting out. Impurities normally present in drinking water cause it to conduct electricity. There is no difference in water vapour regardless of de-ionised or distilled. However, as pointed out distilled water is no longer 100% distilled once opened.

Whatever gives one peace of mind, I guess.