Recent Posts

If anybody doesn't know the N-Zonic, it's a great Mod.
I have a V3 and it's rock solid.

No, I'm comparing it to the Sigelei, but obviously it's not that simple to compare one against the other as the adjustment on both is not exactly precise.
OK they both the little marks and they are so similar as to be the same thing, in fact they may be the same thing.

It just seems to be a little lower powered at the top end of the range.
If I use the Sig fully turned up (10W) and then use the FT one fully turned up (12W claimed) I really cant tell any difference.
If I then turn the FT Kick down to around what should be 10W it's nowhere the near the Sig.
Wondered if the FT one is limiting amps at full output.

I'm not really bothered as I have a couple of attys that are usually wicked at around 1.8ohms and once it's in the tube and vaping well it wont get touched again for quite a while, and I agree with the other comments that it certainly works well in that that sort of range.

Wish I had way of testing them, but unfortunately I haven't, but hey, for a fiver you cant really go wrong.

Use Vodca and Gin, both great. (12%)
Never tried Whisky, but hope you let us know what you think if you go ahead.

Sure I've read a post about this somewhere.
Have you tried looking on Google?

Stainless Steel Dream RBA, with Dream extension Kit, plus "Roid Style" conversion Kit.

This was a spare Dream that hasn't had much use really.
It also comes with my "Roid" style conversion kit including stainless central tube and filler material. (not shown in photo)

Best of both worlds, can be setup Kayfun style or Spheroid style and vapes pretty good both ways.

Dream and extension kit currently on sale at Charlies for £24 plus postage.

asking £20 for the lot including first class recorded delivery.

Perhaps we are all missing the point, and that's why I only use a syringe for measuring small amounts.
One drop is not the same as another drop.
Look at a few mixing calculators.

Consistency is everything.

Ok in answer to the couple of questions.........

a). I'm a locksmith by trade, and treated myself to a new toy a couple of months ago. I bought a mini "milling machine".
Most of the body was cut out using the machine.
The lid was a slice of the timber, cut by the timber merchant.
Obviously there was a certain amount of hand cutting, but the laborious stuff was on the milling machine.

b). I find myself firing it by finger. Holding the buttons away from me most of the time.
Will try and get the PCB a little higher next time but the Vamo board is so bulky (2 boards piggy backed), you need a little room to run wires.

c). Yes, this one has the guts from an old MK2 Vamo, made the face plate for the board in 1.5mm stainless, with the board araldited to side cheeks and then araldited to the face plate.
The box is rebated for the board to fit into and then held by small magnets.

Thanks for the comments.