ronaldo
MOVED ON
Joined:February 2014
Posts: 7,956
Location:
Likes: 6,048
Recent Posts
Last Online Oct 15, 2014 9:31:34 GMT
|
Post by ronaldo on May 8, 2014 11:52:02 GMT
we do have the lovely ronaldo who would, very likely, be able to fix them for you, if you so wished Is Ronaldo able to fix a stripped 510 on a VTR? I'd pay for that. The MVP was always destined to be a battery pack once the 510 gave out. The ZMax is just a mess, probably not worth salvaging. if you can find a 510 connector I will fit it for you free of charge but I wouldn't know where to find one as I am into the electronic side of it mainly as that is what my job is electronics engineer repair and maintenance and yes I have seen 1 Provari that needed 510 connector changing but it was because it was dropped off scaffolding and cracked the connector when it hit the ground not because of stripped threads if you find 1 pm me for my address
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 25, 2024 11:37:58 GMT
|
Post by Deleted on May 8, 2014 11:53:52 GMT
So I have been messing around with rebuilding and rewicking protanks and have a kayfun and kayfun lite that I am messing with, but as I've said before I am considering a nemesis with a kick. Ive gone from cigalikes, to egos, to twists to itvv3 to the zmax (vamo on route) all in around 2 years my question is (just cause I'm nosey!)why did you move over to mechanical mods such as nemesis, caravella, stingray etc? The best mech I've bought and use alongside my 24/7 Provari is one I bought 2nd hand on here.
|
|
barrynorton
Super Member
Joined:September 2013
Posts: 987
Location:
Likes: 372
Recent Posts
Last Online Mar 18, 2015 7:55:26 GMT
|
Post by barrynorton on May 8, 2014 11:54:51 GMT
No, that's the problem, the VTR has this stupid spinning part that I don't think you can get spares for. Thanks for confirming it's not impossible to break the Provari's connector too - if I can be done, I'd do it (probably about two weeks in)
|
|
geordie_vaper
Super Member
dont believe the hype!
Joined:November 2013
Posts: 5,969
Location:
Likes: 3,156
Recent Posts
Last Online Sept 18, 2014 7:51:08 GMT
|
Post by geordie_vaper on May 8, 2014 11:57:22 GMT
thats the v1 the v2 hasnt got the spinny bit at the 510 base thingy ma bob
|
|
barrynorton
Super Member
Joined:September 2013
Posts: 987
Location:
Likes: 372
Recent Posts
Last Online Mar 18, 2015 7:55:26 GMT
|
Post by barrynorton on May 8, 2014 11:59:21 GMT
Yeah, I know
|
|
ronaldo
MOVED ON
Joined:February 2014
Posts: 7,956
Location:
Likes: 6,048
Recent Posts
Last Online Oct 15, 2014 9:31:34 GMT
|
Post by ronaldo on May 8, 2014 12:11:47 GMT
Yeah, I know pm sent please read
|
|
Greg
Super Member
The Hoarder
Vape Free Since 16th May 2016.
Joined:November 2013
Posts: 8,261
Location:
Likes: 6,928
Recent Posts
Last Online Oct 9, 2014 19:25:50 GMT
|
Post by Greg on May 8, 2014 13:02:47 GMT
No, that's the problem, the VTR has this stupid spinning part that I don't think you can get spares for. Thanks for confirming it's not impossible to break the Provari's connector too - if I can be done, I'd do it (probably about two weeks in) You don't look like a scaffolder
|
|
satanswombat
Full Member
Joined:September 2013
Posts: 140
Location:
Likes: 62
Recent Posts
Last Online May 2, 2018 20:07:27 GMT
|
Post by satanswombat on May 8, 2014 13:13:24 GMT
Size and hopefully it will survive a night out with a drunken scotsman. I was worried about taking the vamo outside but I'm more confident with a steel tanked aerotank on a mech.
|
|
jaysey
Super Member
If life throws you lemons slice em up and throw them in a very large vodka :)
Joined:August 2013
Posts: 2,152
Location:
Likes: 1,520
Recent Posts
Last Online Feb 17, 2015 16:50:53 GMT
|
Post by jaysey on May 8, 2014 13:21:50 GMT
Wouldn't say I've upgraded , do like the look of my nemesis but using it kicked , wary of it since I sat in down without locking it ! Boiling hot juice spotting all over the work top alerted me , tubes and battery boiling to touch ! Relegated to the cupboard for a while ! OH not impressed at all as he is not a vaper but a dirty smoker ! Guess that's what happens if not used exclusively ! Think I must have thought it was my vamo ! Could have been disastrous if I'd gone out , but I do like it is it possible to use it without a kick with non protected battery's ? Using 1.5 coils ? It does deserve another chance as it's sooo good looking ! Feel it's a cheat using a kick in a way ? Also how long before the performance would drop ( 18650 battery )
|
|
Mrsmac
Super Member
On a cloud of Coconut Custard
Joined:December 2011
Posts: 2,315
Location:
Likes: 1,175
Recent Posts
Last Online Jun 13, 2019 20:07:29 GMT
|
Post by Mrsmac on May 8, 2014 13:31:45 GMT
Sorry to hear of your experience jaysey, I'm sure someone will be able to answer your question
|
|
geordie_vaper
Super Member
dont believe the hype!
Joined:November 2013
Posts: 5,969
Location:
Likes: 3,156
Recent Posts
Last Online Sept 18, 2014 7:51:08 GMT
|
Post by geordie_vaper on May 8, 2014 13:46:09 GMT
what is the question there is to much txt to read,
you can use a mech without a kick yes but i would advise using either imr batterys or high amp batterys, why do you want to use unprotected ones for?
|
|
geordie_vaper
Super Member
dont believe the hype!
Joined:November 2013
Posts: 5,969
Location:
Likes: 3,156
Recent Posts
Last Online Sept 18, 2014 7:51:08 GMT
|
Post by geordie_vaper on May 8, 2014 13:49:14 GMT
i cant really say how long till you notice the drop of in performance it depends how much and often you vape, its not cheating using a kick at all
|
|
Deleted
Joined:January 1970
Posts: 0
Location:
Recent Posts
Last Online Nov 25, 2024 11:37:58 GMT
|
Post by Deleted on May 8, 2014 13:57:32 GMT
Why did I go from vamo, MVP, SVD to mech mods? A) size B) looks I started using mechs with a kick, but now don't bother with it. My coils are 1.2-1.4 ohms which gives me a lovely hit when I change the battery, and are perfectly nice all the way through until I have to change it. I stopped using it around the time I got a 14500 mod (so you can't kick it, it's too small) and realised I didn't need it. Exactly. Regulated mods and mech mods are like chalk and cheese,. The Provari is like an auto Porsche (albeit ugly as sin) and a mech mod like a Austin Healey 3000. it's like the difference between swimming with a cossie and skinny dipping. Ditch the kick and go naked and stop making excuses for buying a Provari after all it works just the same as a spinner Remind me not to post after a lunchtime session
|
|
jaysey
Super Member
If life throws you lemons slice em up and throw them in a very large vodka :)
Joined:August 2013
Posts: 2,152
Location:
Likes: 1,520
Recent Posts
Last Online Feb 17, 2015 16:50:53 GMT
|
Post by jaysey on May 8, 2014 13:58:06 GMT
what is the question there is to much txt to read, you can use a mech without a kick yes but i would advise using either imr batterys or high amp batterys, why do you want to use unprotected ones for? Yeh sorry for the waffle ! I only have unprotected ones at the moment so just wanted to try it without the kick to compare ! I have Panasonic NCR 18650B Mh12210 think 3200 mah And efest 18650 2000mah These ok ? If not il order some protected
|
|
geordie_vaper
Super Member
dont believe the hype!
Joined:November 2013
Posts: 5,969
Location:
Likes: 3,156
Recent Posts
Last Online Sept 18, 2014 7:51:08 GMT
|
Post by geordie_vaper on May 8, 2014 14:00:58 GMT
the efest are imr batterys you can use them in a mech, you could use the panasonics in a mech mod but i would strongly advise against it
|
|