Recent Posts

Nicotine is absorbed through your skin - thats how the patches work. But if you wipe it off or wash it off fairly quickly it's not going to be a problem as far as absorption goes. If you get undiluted nic on you, then wash it off straight away, but normal juice isn't that much of a risk in my eyes.

After all, you're not exactly likely to put some on your hand and leave it there for any length of time…

Not sure why people are so keen on kicks. You build your coil so it works right without the kick, when performance drops off significantly, change batteries.

Nemesis is brilliant (i have the FT clone). No messing with adjusting pins to stop battery rattle, nice easy to use locking ring that don't unscrew the firing button if you are not careful.

A kayfun is a little fiddly and considering you have to remove the juice from the tank to rebuild it a slight pain. Perhaps a Squape or a clone of it?

I'd say a nice dripper is way more bomb proof - nothing to go wrong. Yes, over fill it and it'll leak, so just put less in it, dead easy. Change flavours with very little hassle. With a micro coil and cotton, you can change the wick in minutes leaving the coil in place I've had this coil in mine for over a month and can see it lasting another 1 or 2. Another advantage is that you can really see whats going on to build an understanding of the way the flavour changes with gunked up coil, burned wick, drying out wick. Just pop the top off and have a look Ohh and they are much smaller than a tank type.

keep a clean install of windows, be careful what you install and run. Best thing to do if things get slow and messed up is to wipe and make a clean install. It only takes a few hours

If you are getting a burned taste, then it's not wicking well enough as others have said. If you already burned your wick, then you might struggle to get rid of the taste after.

A 1.8 ohm coil on a mech is fairly high and shouldn't be a problem. It does sound like a wicking problem.

Have a look at this calculator: calculator a 1.8 ohm coil at 4.2 volts (maximum you would get with a fresh battery) is only 9.8 watts. That's not really very high in the power scheme.



If you're struggling with the attys you are using at the moment on mechs, I'd say play with rebuilding them to see how you can get them going better, there is plenty of info out there on poo tube. If you're not able to, fair play, stick with vv/vw for a while until you understand for yourself whats going on.

There is no point trying to go too fast.

Why make that and then limit it to 15w? makes no sense at all. If it were a big mod with big power then it might have a market, otherwise what's the point..

That is really nice